A Win-Win During the Cold or Winter and the Heat of Summer.
With the economy and employment rate in shambles, every individual and family is trying to skate by with the meager amount of income that is being brought in, especially with repairs and house repairs needing to be made. Trying to save money on the luxuries is simple; just stop buying them. Cutting back on the necessities, such as food, heating and cooling, and fuel is another matter.
Most families do not have much of a choice about paying for their air conditioning and heating. If they do not pay, then the climate will become very uncomfortable. There is a fairly good solution to the cost of this high utility bill. A radiant barrier installed in the attic can greatly enhance the comfort of the living quarters and help reduce the expensive utility bill.
Radiant barriers are probably the easiest material to retrofit a home's insulation. The most common method of installing it is essentially to lay it directly over the existing attic insulation. While installing a radiant barrier is fairly straight forward, it is not recommended for the do-it-yourselfer, especially if there is a vaulted ceiling involved. A few key points need to be followed in order to not cause potential problems.
The ventilation of the attic needs to be maintained and in some cases improved. Should the ventilation not be sufficient, the home owner will be introducing a much greater chance of mold, mildew, and rotting. Assuming the ventilation is adequate, the majority of homes are already set up to receive a radiant barrier.
It is important to take notice of the manner in which the radiant barrier is secured to the joists or rafters. Staples are not a recommended way of securing the radiant barrier. Special tape is best to make the seams of the overlapping joints. Occasionally, it may be necessary to use staples in awkward nooks and crannies and angles where the slope of the roof connects with a vertical supporting member.
The whole purpose of the radiant barrier is to prevent the heat or cold from penetrating through into the living quarters. This is achieved by the radiant barrier's reflective surface. The barrier reflects the heat or cold away from the living areas, depending upon which season it is. Because of the fact that it works on both ends of the thermometer, a home owner can expect to get their investment back by lowering the monthly utility bill.
As an afterthought, improving the attic insulation can be a positive reselling feature of a home, which will only add value to a prospective home buyer. The investment is a win-win situation. Lower utility bills allows the home owner to enjoy their investment or profit from it by selling the home. Either way, the result will be the same; saving money.
For more information and guidance about radiant barriers, visit http://www.utilityimprovements.com. Utility improvements has a couple of great videos on their site to illustrate how thermal reflection works.
Posted by WebDrafter.com, Inc. with permission.
Article independently authored by Daniel Elliott. The content herein may or may not reflect the views and opinions of Utility Improvements.com.
Friday, January 29, 2010
Tuesday, January 26, 2010
Improving Energy Efficiency Through Insulation Options
In today's struggling economy, many families are searching for new ways to lower bills. Lowering home energy costs and making a home more efficient benefit both the wallet and the environment. Turning off lights when leaving a room and lowering the thermostat by a couple degrees will help the long term efficiency of the home, but only a slight change will be seen from a financial standpoint. Small changes to lower energy usage can be fairly easy for family members to adhere to, but to see a significant drop in the utility bill; bigger changes should be made.
Many families are looking to remodel and revamp their home to be more energy efficient and maximize overall cost reductions. New windows and solar panels are considered good choices, but another choice is increasing in popularity. Radiant barriers are an option to reflect heat from being absorbed into the home. Reflective space-age material, originally developed by NASA, is installed over current insulation and will prevent heat transfer. Radiant barriers can increase the efficiency of the home by almost 50% and will keep homes cooler in the summer and warmer in the winter. This reflective material resists conductive currents as well as convection, while still allowing air to circulate normally.
There are many other insulation options for retrofitting a home, but these require the messy and time consuming removal of the old insulation. Installing a radiant barrier to a home can be done during new construction or remodeling and should be performed by a qualified and experienced contractor. Adding an energy efficient aspect to home insulation can keep costs low year round. Making environmentally friendly choices will benefit the family for the entire life of the home.
For more information and guidance about energy efficiency and radiant barriers such as Temper Shield, visit http://www.utilityimprovements.com. Utility Improvements specializes in exceptionally effective thermal radiant barriers and demonstrates how they work via videos on their Website.
Many families are looking to remodel and revamp their home to be more energy efficient and maximize overall cost reductions. New windows and solar panels are considered good choices, but another choice is increasing in popularity. Radiant barriers are an option to reflect heat from being absorbed into the home. Reflective space-age material, originally developed by NASA, is installed over current insulation and will prevent heat transfer. Radiant barriers can increase the efficiency of the home by almost 50% and will keep homes cooler in the summer and warmer in the winter. This reflective material resists conductive currents as well as convection, while still allowing air to circulate normally.
There are many other insulation options for retrofitting a home, but these require the messy and time consuming removal of the old insulation. Installing a radiant barrier to a home can be done during new construction or remodeling and should be performed by a qualified and experienced contractor. Adding an energy efficient aspect to home insulation can keep costs low year round. Making environmentally friendly choices will benefit the family for the entire life of the home.
For more information and guidance about energy efficiency and radiant barriers such as Temper Shield, visit http://www.utilityimprovements.com. Utility Improvements specializes in exceptionally effective thermal radiant barriers and demonstrates how they work via videos on their Website.
Wednesday, January 20, 2010
Save Money and Improve Insulation with Radiant Barriers
Heating a Home Without Large Utility Bills
The last thing any homeowner wants is to pay out large sums of money to upgrade the home's HVAC system, however, with the extreme temperatures that the middle of winter or summer bring, many homeowner's direct their attention to the heating or cooling abilities of the current HVAC system. Before considering incurring the large expense of installing a more efficient and powerful heat pump or even a furnace, the homeowner needs to make sure that the house envelope is sealed well.
This means that the doors and windows should not leak and the insulation should be adequate to prevent the transfer of heat into or out of the interior of the home. Many homes however, can not claim to have the proper amount of insulation or properly installed insulation. While the insulation within the walls can be improved with loose fill being blown into the walls, the attic should be of greater concern.
Because heat rises, heat loss during the winter months is a major concern. Improper insulation in the attic accounts for having the heating system cycle on more frequently due to the loss of heat. Rather than piling on more insulation over the existing insulation in the attic, which can cause moisture and mold problems during the summer months, adding a radiant barrier is the quickest, safest, and most economical method to combat heat loss.
A radiant barrier acts, much like aluminum foil does when wrapped around a hot roll. It prevents rapid heat loss ensuring the inside stays warm. The results of properly installing a radiant barrier should be the retention of warmer air within the living quarters. When the heating cycle of the HVAC system kicks on, the intake will already have a warmer source of air with which to heat. The wear and tear on the air handler will be reduced and there should be longer time periods between the cycling of each heating cycle.
Providing a warm and comfortable atmosphere is what a radiant barrier can provide. Saving money through less wear and tear on the heating and cooling system and repair calls will save money. The less time the air handler and heat pump need to cycle on and off can yield savings better spent elsewhere instead of the utility bill. It really is a win-win solution for the homeowner to install a radiant barrier.
For more information and guidance about radiant barriers, thermal insulation, and Temper Shield, visit http://www.utilityimprovements.com. Utility Improvements has great videos on their site to illustrate the cost savings thermal barriers.
The last thing any homeowner wants is to pay out large sums of money to upgrade the home's HVAC system, however, with the extreme temperatures that the middle of winter or summer bring, many homeowner's direct their attention to the heating or cooling abilities of the current HVAC system. Before considering incurring the large expense of installing a more efficient and powerful heat pump or even a furnace, the homeowner needs to make sure that the house envelope is sealed well.
This means that the doors and windows should not leak and the insulation should be adequate to prevent the transfer of heat into or out of the interior of the home. Many homes however, can not claim to have the proper amount of insulation or properly installed insulation. While the insulation within the walls can be improved with loose fill being blown into the walls, the attic should be of greater concern.
Because heat rises, heat loss during the winter months is a major concern. Improper insulation in the attic accounts for having the heating system cycle on more frequently due to the loss of heat. Rather than piling on more insulation over the existing insulation in the attic, which can cause moisture and mold problems during the summer months, adding a radiant barrier is the quickest, safest, and most economical method to combat heat loss.
A radiant barrier acts, much like aluminum foil does when wrapped around a hot roll. It prevents rapid heat loss ensuring the inside stays warm. The results of properly installing a radiant barrier should be the retention of warmer air within the living quarters. When the heating cycle of the HVAC system kicks on, the intake will already have a warmer source of air with which to heat. The wear and tear on the air handler will be reduced and there should be longer time periods between the cycling of each heating cycle.
Providing a warm and comfortable atmosphere is what a radiant barrier can provide. Saving money through less wear and tear on the heating and cooling system and repair calls will save money. The less time the air handler and heat pump need to cycle on and off can yield savings better spent elsewhere instead of the utility bill. It really is a win-win solution for the homeowner to install a radiant barrier.
For more information and guidance about radiant barriers, thermal insulation, and Temper Shield, visit http://www.utilityimprovements.com. Utility Improvements has great videos on their site to illustrate the cost savings thermal barriers.
Subscribe to:
Posts (Atom)